5 Common Air Conditioning Mistakes You Should Avoid

In Australia, air conditioning is a necessity, especially in the sweltering summer months. Simply owning an air conditioner is insufficient to ensure perfect cooling and an extended lifespan for the unit. Several mistakes and dos and don'ts should be avoided.


Make sure your air conditioner is functioning correctly if you have one. When operating your air conditioning, it's crucial to avoid common mistakes.


What mistake you must avoid?


1. Neglecting timely maintenance


Neglecting to maintain your AC system is one of the most frequent errors. Your air conditioning machine needs regular maintenance to operate effectively, just like any other mechanical item. The majority of manufacturers advise air conditioning service at least once each year.


The optimal operation of your air conditioning machine depends on routine maintenance, particularly in Australia's harsh climate. Maintenance neglect can result in expensive repairs and a decline in performance.


2. Setting the temperature too low


Some of us think that the lower the thermostat is set, the quicker your home cools. That's incorrect. No matter how high or low your thermostat is set, your home cools at the same rate. However, this action would just produce excessive energy and make the units work too hard. The thermostat level must be normalized, or else there will be systemic problems.


Lowering the thermostat too low may initially feel good, but it will quickly increase your energy costs. A comfortable temperature is normally between 23 and 26 degrees Celsius.


3. Shutting and closing all vents


Another mistake you must be sure to avoid covering or sealing the air vents. Although it might seem like a good idea to close vents in empty rooms, doing so might harm your air conditioner and decrease its effectiveness. Ensure that all vents are clear and open.


It could appear advantageous for the Reverse cycle ducted air conditioning to do this. But, in practice, it would put a considerable burden on the device, particularly in terms of energy use.


4. Not changing filters regularly 


Your Air conditioning Melbourne,  filter parts can efficiently remove dust, allergens, and other dangerous particles from the air. But, as time goes on, they need to be cleaned or even replaced because these particles can build up and get inside other unit parts.


The air filter in your home filters out dust, allergens, and other contaminants from the air that enters the system. These thin cardboard and wire structures require constant replacement. After about six months, that filter gets so clogged with dirt that air struggles to pass through, and the device can no longer fully do its job. 


It not only makes your house dustier, but it also significantly reduces the airflow to your air conditioner.


5. Leaving your drain unchecked


Numerous air conditioning units employ drains to catch condensation and minimize moisture problems by sending water outside the building. These drains may be simple to overlook, yet they provide a crucial function.


Your air conditioning system suffers from a clogged and overflowing drain, but the surrounding walls and flooring could also be permanently damaged. To prevent muck from building up, keep your drain line clean and think about snaking it with a wire once or twice a year.



Your Air conditioning, is not cooling as it should? Dale Air is here to help


Avoiding these mistakes can add more years for your air conditioner, although if your air conditioner is not working properly or has any issues, give us a call we’ll fix it for you.  We supply, install, and service air conditioners across the whole of Melbourne.


Comments

Popular posts from this blog

What to Consider Before Repair or Replace Your Gas Ducted Heating System

What are the benefits of reverse-cycle air conditioning?